4
OPERATING INSTRUCTIONS
CAUTION
Inspect the Vacuum Regulator for visual damage before use,
DO NOT USE if damaged.
NOTE:
Overflow protection should be used with the Vacuum Regulator.
(i.e. Filter, Vac Trap, Canister equipped with shut off).
2. Attach the Vacuum Regulator to the vacuum source.
A. REG MODE (Regulated Mode) ALL MODELS
2. Block the bottom port of the Regulator.
3. Using the Regulator Knob, set the desired vacuum.
To INCREASE vacuum - Turn Knob CLOCKWISE
To DECREASE vacuum - Turn Knob COUNTERCLOCKWISE
B. LINE MODE (Full, unregulated vacuum)
PM3100 & PM3600 SERIES ONLY
3.
.
WARNING
setting. Vacuum may be set at improper level for procedure.
ALWAYS confirm vacuum setting prior to performing procedure.
The vacuum CANNOT be regulated when the Selector Knob is
Full Line Vacuum is present between settings.
REGULATE MODE
Turn selector knob fully clockwise to the regulator mode and
confirm vacuum setting before use.
LINE MODE
Turn the selector knob fully counterclockwise for line vacuum
and confirm vacuum settings before use.
CAUTION
DO NOT operate the Vacuum Regulator when the collection
the Vacuum Regulator. This will void the warranty.
Kommentare zu diesen Handbüchern