Precision-medical PM65 EasyGoVac Aspirator Bedienungsanleitung

USER MANUAL300 Held Drive Tel: (+001) 610-262-6090Northampton, PA 18067 USA Fax: (+001) 610-262-6080www.precisionmedical.comFederal (USA) law restri

9TROUBLESHOOTINGIf the Easy Go Vac Aspirator fails to function, consult the Troubleshooting Guide. If the problem cannot be corrected, consult your Pr

10Tell us how we are doing!Visit us at www.precisionmedical.comREPLACEMENT PARTSDescription Part #Filter 506047Filter Assembly 503293800cc Canister, (

502598 Rev12 6/13 (?M) Printed in USALIMITED WARRANTYAND LIMITATION OF LIABILITYPrecision Medical, Inc. warrants that Easy Go Vac Aspirator (the Pro

1RECEIVING / INSPECTIONRemove the Precision Medical, Inc. Easy Go Vac Aspirator from packaging and inspect for damage. If there is any damage, DO NOT

2 DANGERTo reduce the risk of Electrocution:• Always unplug the Easy Go Vac Aspirator after using, except when battery is being recharged.• DO NOT u

3SPECIFICATIONSDimensions (in Carry Bag): Length: 12 in (30 cm) Width: 9.5 in (24 cm)Height: 10 in (25 cm)Weight (with Carry Bag and all Ac

4COMPONENT DESCRIPTIONCAUTIONIf for any reason any label becomes illegible or lost, contact Precision Medical, Inc.GROUNDING INSTRUCTIONSThe Battery C

5OPERATING INSTRUCTIONSCAUTIONDO NOT run the Easy GO Vac Aspirator without the Inline Hydrophobic Filter. This will void the warranty.CAUTIONInspect t

6B. INTERNAL BATTERY OPERATION1. Steps 1 thru 4, see “OPERATING INSTRUCTIONS”.WARNINGOperating Aspirator after yellow Low Battery Light has been on co

75. Push the On/Off ( / ) Switch to the “ON” position. If yellow Low Battery Light stays on continuously, battery needs charging. Charge battery or us

8To replace Inline Hydrophobic Filter:1. Disconnect lter assembly from Suction Canister and remove Suction Canister from the Aspirator.2. Unscrew 